RV 21263 - Launch Pad Step RV The Launch Pad Step shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". RV 21000 - Revolution Post Top Cap The Revolution Post Top Cap sall be precision die-cast from a high-strength aluminum alloy. The Revolution Post Top Cap will be Powder Coated as specified. RV 19601 - Tri Rope Net Hub RV The Rope Net Wall RV shall be made from 16mm steel-reinforced rope with high-strength copolymer plastic intersection connectors and machined aluminum end clevises. The Tri-Rope Net Hub Rail RV shall be fabricated using .375" O.D. 10 gauge steel tubing with welded 1/4" thick steel mounting brackets, 3/16" thick steel anchors, and 1.315" O.D. 12 gauge steel handles. The Tri-Rope Net Hub RV will be Powder Coated as specified. The Post Dual Anchor Bracket RV shall be fabricated using a 1/4" thick steel mounting bracket with welded 3/16" thick steel anchors. The Post Dual Anchor Bracket RV will be Powder Coated as specified. RV 12831 - Matrix Angled Net Wall RV The 16-Link Galvanized Chain shall be 5/0 galvanized low-carbon steel chain with silver shield finish. The Matrix Angled Net Wall shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end ferrules. The Matrix Net Wall Beam shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel mounting brackets, 3/16" thick steel anchors, and 1.315" O.D. 12 gauge steel handles and will be Powder Coated as specified. The Post Anchor Bracket RV shall be fabricated using 1/4" thick stainless steel plate with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV 12591 - Sectional Lunar Climber RV The Post Offset Tab Bracket shall be fabricated using 1/4" steel mounting bracket with welded 3/8" thick steel tab and will be Powder Coated as specified. The Sectional Lunar Climber Panel, Center & Outside Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. RV 12411 - Twist Net Climber RV The 16-Link galvanized Chain shall be 5/0 galvanized low-carbon steel chain with silver shield finish. The Post Anchor Bracket RV shall be fabricated using 1/4" thick stainless steel plate with welded 3/16" thick steel anchor and will be Powder Coated as specified. The Twist Net Rope Climber shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end ferrules. RV 10000 - Revolution Post The Revolution Core Post shall be made from 3.500" O.D. 11 gauge galvanized steel tubing. The Revolution Bottom Cap shall be precision die-cast from a high-strength aluminum alloy. The Revolution Bottom Cap will be Powder Coated as specified. The Revolution Mounting Sleeve shall be precision die-cast from a high-strength aluminum alloy. The Hole Plug shall be precision molded nylon for durability, holding stength and snug installation. RV-1971 - Rumble Deck RV The Multi-Spring Deck Mounting Plate shall be precision cut using 1/4" thick plate steel and will have a multi-stage baked-on powder coat finish. The Playground Event Spring shall be 5-3/4" O.D. with a free height of 14" and will have a multi-stage baked-on powder coat finish. The Rope Clevis shall be fabricated using precision cut and formed 3/16" thick plate steel. The Rumble Deck Frame shall be fabricated using punched, formed and welded 12 gauge sheet steel and will be Play-Tuff™ coated after fabrication. The Rumble Deck Rope shall be made from 16mm steel reinforced rope with high-strength copolymer plastic intersection connectors and machined aluminum end ferrules. The Event Spring Retainer shall be fabricated using precision cut and formed 1/8" thick plate steel and will have a multi-stage baked-on powder coat finish. The Tri Spring Deck shall be fabricated using punched and welded 12 gauge sheet steel and will be Play-Tuff™ coated after fabrication. RV 1961 - Tri-Pad The Tri-Pad shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Step Pad Leg shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel mounting plate. The Step Pad Leg will be Powder Coated as specified. RV-1925-PT - Hex Net Tower Middle RV The Hex Net Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Net RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Hex Net Platform Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV-1925-BS - Hex Net Tower Bottom RV The Hex Net Bottom Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Net RV shall be made from 16-mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV-1925 - Hex Net Tower Top RV The Hex Net Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Top Net RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Net Tower Top Rail RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 3/16" thick stainless steel anchors and 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. The Hex Net Platform Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV 1435 - Arch Loop Traverse RV The Arch Loop Traverse RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1.315" O.D. 12 gauge steel loops and 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. The Arch Loop Traverse 1 Mount RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1.315" O.D. 12 gauge steel loops, 1/4" thick stainless steel mounting bracket and stainless steel housing and will be Powder Coated as specified. The Arch Loop Traverse 2 Mount RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1.315" O.D. 12 gauge steel loops and stainless steel housings and will be Powder Coated as specified. RV 1293 - Net Tower Ladder RV The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. The Net Tower Ladder RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. RV 1286 - Arched Lunar Climber RV The Arched Wall Climber Panel shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Arched Panel Climber Frame RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing and 1.660" O.D. 11 gauge steel support rails with welded 1/4" thick steel tabs mounting brackets. The Arched Panel Climber Frame RV will be Powder Coated as specified. RV 1257 - Portal Rung Climber RV The Portal Rung Climber RV shall be fabricated using 1.660" O.D. 11 gauge steel rails and 1.315" O.D. 12 gauge steel handle and rungs with welded 1/4" thick steel mounting brackets and will be Powder Coated as specified. 1414 1 - Lily Pad Seat-Step Assembly The Lily Pad No Hole shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Step Pad Step Leg shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel mounting plate and will be Powder Coated as specified. 1261 - Ebb & Flow Climber The Ebb & Flow Climber Frame, and Platform Rail shall be fabricated using 1.900" O.D. 11 gauge steel tubing with welded 1/4" and 3/16" thick steel clevises and 1.900" steel mount plugs and will be Powder Coated as specified. The Ebb & Flow Anchor Brackets shall be fabricated using 1/4" thick stainless steel and will be Powder Coated as specified. The Ebb & Flow Horizontal Strut shall be fabricated using 1.900" O.D. 11 gauge steel tubing with welded 3/16" thick steel clevises and 1.900" steel mount plug pins and will be Powder Coated as specified. The Ebb & Flow Deck Plate shall be fabricated using 1/4" thick steel plating with welded 3/16" thick steel clevises and will be Powder Coated as specified. The Ebb & Flow Nets shall be made from 16mm steel-reinforced rope with high-strength copolymer plastic intersection connecters and machined aluminum ferrules. The Mounting Blocks shall be two-part and precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. The Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified.