R5-1601 - Panel Type 1 (Rotomold) 
 	The Roto Panel shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Panel Roto Pipe shall be fabricated using Ø1.315 12ga steel tubing. The Roto Panel Bracket shall be fabricated using 10ga sheet steel and will have a multi-stage baked-on powder coat finish. The Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish.

PC-1600 - Tilt Maze Game 
 	The Maze Table shall be made from high density 3/4" sheet plastic specially formulated for optimum UV-stability and color retention. The Maze Bubble shall be made of Thermoformed 3/16" Clear Polycarbonate. The Mount-Bolt Thru shall have an unthreaded zinc-plated steel insert running through the center that enables the mount to handle both vertical and horizontal loads. The Mount-Bolt Thru is made of black oil and ozone-resistant neoprene. The Polycarbonate Washer shall be fabricated using .118" thick Polycarbonate. The Rubber 3-Ply Washer shall be fabricated using heavy duty black Rubber 3-Ply Belting. The 5/8" White Nylon Ball shall be opaque and off-white in color. The Ball shall have a diameter of .625" and be made of Nylon 6/6. The tilt Maze Game Support shall be made of 2.375" O.D. 10 gauge tube steel and (2) 1/4" plates for mounting to Maze Table. The Tilt Maze Game Support will be Powder Coated as specified.