PC 4286 - Bench w/ Back 
 	The Bench Divider shall be fabricated using 1.029" O.D. 14 gauge steel tubing with welded 1/4" thick steel mounting brackets and will be Powder Coated as specified. The Bench Top shall be fabricated using punched, formed and welded 14 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The Bench Frame In-Ground Leg shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 10 gauge steel mounting plate and will be Powder Coated as specified. The Bench Frame Surface Mount shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.5" x 3" rectangular tube steel and welded 10 gauge steel mounting plates and will be Powder Coated as specified.

PC 2550 - Parallel Bars 
 	The Parallel Bars shall be made of 1.900" O.D. 11 gauge tube steel with 5/8" round bar as footing anchors. The Parallel Bars will be Powder Coated as specified.

PC 2120 - Arch Swing Assembly R5 
 	The Swing Arch & Swing Beam shall be fabricated using 5" O.D. 11 gauge galvanized steel tubing and will be Powder Coated as specified. The Arch Swing Casting and Arch Swing Washer shall be cast from a high-strength aluminum alloy and will be Powder Coated as specified. The Swing Chain shall be 7 mm (1/4") PC Grade 30 chain with a silver shield cold galvanized finish. The Swing Seats shall be molded from a UV-stabilized flexible rubber compound with slash-proof, reinforced metal inserts.

PC 1809 - Triple Hoop 
 	The 9' Post R35 shall be fabricated using 3.5" O.D. 11 gauge steel tubing. The Cap & Plugs shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Triple Hoop shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250".

4250 - Rectangular Picnic Table 
 	The Table Top & Bench shall be fabricated from punched, formed, and welded 14 gauge sheet steel and shall be Play Tuff(TM) coated after fabrication. The Table Frame Brace shall be fabricated from punched and formed 10 gauge sheet steel and shall have a powder coat finish. The Table Frame shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 10 gauge steel mounts and shall have a powder coat finish. The Frame Support shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention.