1851/PC-1450 - Butterfly Wings The Butterfly Wings shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Butterfly Inserts shall be made from 0.220" sheet PMMA. The Butterfly Wing Covers shall be made from 3/16" HR sheet steel and welded studs and will have a multi-stage baked-on powder coat finish. The Butterfly Split Collars & Split Collar Halves shall be made from 1/4" HR sheet steel and will have a multi-stage baked-on powder coat finish. The Castle Tab 90 Degree shall be made from 3/16" HR sheet steel and will have a multi-stage baked-on powder coat finish. The Socket Clamps & Mounting Lugs shall be precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. RV 21260/21263 - Launch Pad Seat and Step RV The Launch Pad Step shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". RV 21000 - Revolution Post Top Cap The Revolution Post Top Cap sall be precision die-cast from a high-strength aluminum alloy. The Revolution Post Top Cap will be Powder Coated as specified. RV 18029 - Single Post Shade Sail Canopy RV The Canopy Top Hook shall be fabricated using a 1/4" thick steel mounting bracket with a welded 3/16" thick steel tab and will be Powder Coated as specified. The Single Post Rafter shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel brackets and a 1/2" thick steel plug and will be Powder Coated as specified. The Upper & Lower Sails shall be UV & mildew resistant woven acrylic fabric, folded and stitched for strength and to accommodate steel cable. The Canopy Tensioner shall be fabricated using 2" O.D. 11 gauge stainless steel tube, 1/4" thick stainless steel plate, 3/16" steel plugs, and hardware. RV 16101 - Round Roto Panel RV The Roto Panel Arm RV shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 3/16" thick steel mounting bracket and will be Powder Coated as specified. The Roto Panel Leg RV shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 3/16" thick steel mounting bracket and will be Powder Coated as specified. The Round Roto Panel RV shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". RV 12592 - Split Lunar Climber RV The Post Offset Tab Bracket shall be fabricated using precision cut and formed 1/4" thick stainless steel with welded 3/8" thick steel tab and will be Powder Coated as specified. The Split Lunar Climber Post shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 3/8" thick steel tabs and will be Powder Coated as specified. The Split Lunar Climber Panel, Wings, trim & Event Hanger Caps shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. RV 12411 - Twist Net Climber RV The 16-Link galvanized Chain shall be 5/0 galvanized low-carbon steel chain with silver shield finish. The Post Anchor Bracket RV shall be fabricated using 1/4" thick stainless steel plate with welded 3/16" thick steel anchor and will be Powder Coated as specified. The Twist Net Rope Climber shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end ferrules. RV 12012 - 2' Climb-N-Slide RV The Inside & Outside Slide Climber Rails RV shall be fabricated using 1.315" O.D. 12 gauge steel tubing welded 1/4" thick steel mounting brackets and 10 gauge thick steel tabs and will be Powder Coated as specified. The Slide Climber Support Legs RV shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 10 gauge thick steel tabs and will be Powder Coated as specified. The Slide Climber RV shall be fabricated using punched, formed and welded 12 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The Single Slide Leg 24" - 36" V23 shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 3/16" thick steel plate and will be Powder Coated as specified. The 2' Poly Wave Slide Vers2 shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". RV 10000 - Revolution Post The Revolution Core Post shall be made from 3.500" O.D. 11 gauge galvanized steel tubing. The Revolution Bottom Cap shall be precision die-cast from a high-strength aluminum alloy. The Revolution Bottom Cap will be Powder Coated as specified. The Revolution Mounting Sleeve shall be precision die-cast from a high-strength aluminum alloy. The Hole Plug shall be precision molded nylon for durability, holding stength and snug installation. RV-1971 - Rumble Deck RV The Multi-Spring Deck Mounting Plate shall be precision cut using 1/4" thick plate steel and will have a multi-stage baked-on powder coat finish. The Playground Event Spring shall be 5-3/4" O.D. with a free height of 14" and will have a multi-stage baked-on powder coat finish. The Rope Clevis shall be fabricated using precision cut and formed 3/16" thick plate steel. The Rumble Deck Frame shall be fabricated using punched, formed and welded 12 gauge sheet steel and will be Play-Tuff™ coated after fabrication. The Rumble Deck Rope shall be made from 16mm steel reinforced rope with high-strength copolymer plastic intersection connectors and machined aluminum end ferrules. The Event Spring Retainer shall be fabricated using precision cut and formed 1/8" thick plate steel and will have a multi-stage baked-on powder coat finish. The Tri Spring Deck shall be fabricated using punched and welded 12 gauge sheet steel and will be Play-Tuff™ coated after fabrication. RV 1968 - Warp Rung Wall RV The Warp Rung Wall RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge steel rungs and 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. The Warp Rung Wall 1 Mount RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge steel rungs, and 1/4" thick stainless steel mounting bracket and stainless steel housing and will be Powder Coated as specified. The Warp Rung Mall 2 Mount RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge steel rungs and stainless steel housings and will be Powder Coated as specified. RV 1959 - Tri Ring Hub RV The Tri-Ring Hub Rail RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge hand rails and 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. The Tri-Ring Hub Rail with Mounts RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge hand rails, 1/4" thick stainless steel mounting brackets, and stainless steel pins and will be Powder Coated as specified. The Post Tab Bracket RV shall be fabricated from 1/4" thick stainless steel mounting bracket with welded 3/8" thick steel tab and will be Powder Coated as specified. The Tri-Ring shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250", and .375" thick molded in aluminum mounting plates. RV-1925-PT - Hex Net Tower Middle RV The Hex Net Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Net RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Hex Net Platform Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV-1925-BS - Hex Net Tower Bottom RV The Hex Net Bottom Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Net RV shall be made from 16-mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV-1925 - Hex Net Tower Top RV The Hex Net Platform shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Platform Plug Top and Bottom shall be machined from high strength aluminum alloy and will be Powder Coated as specified. The Hex Net Tower Top Net RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. The Net Tower Top Rail RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 3/16" thick stainless steel anchors and 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. The Hex Net Platform Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. RV 1437 - Tri-Pad Jungle Traverse 90 Degree RV The Tri-Pad shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Tri-Pad Jungle Traverse 90° Top Frame RV shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick stainless steel mounting brackets, 3/16" thick stainless steel anchors, and stainless steel pin and shall have a powder coat finish. The Tri-Pad Jungle Traverse Vine shall be made from 16mm steel-reinforced rope with machined aluminum end clevises. The Tri-Pad Jungle Traverse Station shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel plate and 3/16" thick stainless steel anchor and shall have a powder coat finish. The Tri-Pad Cap shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Tri-Pad Support Sleeve shall be fabricated using 2" O.D. 10 gauge stainless steel tubing. RV 1307 - Revolution Handle The Handle RV shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1/4" thick stainless steel mounting brackets and will be Powder Coated as specified. RV 1293 - Net Tower Ladder RV The Post Anchor Bracket RV shall be fabricated using a 1/4" thick stainless steel mounting bracket with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified. The Net Tower Ladder RV shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end clevises. RV 1286 - Arched Lunar Climber RV The Arched Wall Climber Panel shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Arched Panel Climber Frame RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing and 1.660" O.D. 11 gauge steel support rails with welded 1/4" thick steel tabs mounting brackets. The Arched Panel Climber Frame RV will be Powder Coated as specified. RH-21004 - Single Arm Event Hanger Hybrid The Event Hanger RH shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel clevis and stainless steel pin and will be Powder Coated as specified. The Mounting Blocks shall be two-part and precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. R5-18030 - Orbital Shade The Orbital Shade - Post Connectors shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1/4" thick steel brackets and tabs and shall have a powder coat finish. The Orbital Shade - Curved Extensions shall be fabricated using 5" O.D. 11 gauge steel tubing with a welded 1/4" thick steel cap and 3/8" thick steel brackets and shall have a powder coat finish. The Orbital Shade - Outside Frames shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 3/8" thick steel tabs and a welded nut and shall have a powder coat finish. The Orbital Shade - Canopy Support Frames shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1/4" thick steel tabs and shall have a powder coat finish. The Orbital Shade Canopy shall be UV & mildew resistant woven acrylic fabric, folded and stitched for strength and to accommodate steel tensioner. R5 1500 2 - 2 Section Crawl Tube Tube Sections and Crawl Tube Panel shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". R5 1317 - Triple Twister Entry Panel The Triple Twister Slide Entry Panel and Stiffener shall be made from high density 3/4" sheet plastic specially formulated for optimum UV-stability and color retention. The Head Rail shall be fabricated from 1.315" O.D. 12 gauge tube steel welded to 1/4" Steel tabs and will be Powder Coated as specified. The Sit Down Side Guard shall be fabricated from 1.029" O.D. 14 gauge tube steel welded to 10 gauge mounting tabs and will be Powder Coated as specified. The Mounting Lugs shall be precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. R5 1309 - Half Wall (Handle) Assembly The Half Wall R5 shall be constructed of 1.315" O.D. 12 gauge tube steel outer rails with 1.029" O.D. 14 gauge tube steel welded vertically. The Half Wall may also have welded mounting tabs and/or plates and will be Powder Coated as specified. R5 1306 - Double Sit Down Slide Hood The Double Sit Down Slide Hood shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". The Sit Down Slide Hood Top Rail shall be constructed of 1.315" O.D. 12 gauge tube steel and will be Powder Coated as specified. The Sit Down hood Bar shall be constructed of 1.315" O.D. 12 gauge tube steel and 1.029" O.D. 14 gauge tube steel and will be Powder Coated as specified. R5 1229 - Cross Loop Climber The Cross Loop Climber shall be constructed of 1.660" O.D. 11 gauge tube steel with welded 1.315" O.D. 12 gauge tube steel handles, rungs, and 3/16" thick steel mounting plate and will be Powder Coated as specified. R5 1109 - Balcony Deck R5 The Balcony Deck shall be punched, formed and welded 12 gauge sheet steel. Balcony Deck shall be Play-Tuff(TM) coated after fabrication. The Balcony Deck Wall R5 shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1.029" O.D. 14 gauge steel rails and will be Powder Coated as specified. R5 1100 - Deck Identification NO SPECIFICATIONS PC-1920 - Spring See-Saw The Post Base shall be fabricated using 5.0" O.D. 7 ga T.S., 1/2" thick sheet steel, and 1/4" thick sheet steel and will have a multi-stage baked-on powder coat finish. The Spring See Saw Beam shall be fabricated using 4" X 4" x .120" square tube, 1.900" O.D. 11 gauge steel tube with welded 1/4" thick steel mounting plate, brackets, gussets, 12ga steel cap and 10 gauge steel brackets and will have a multi-stage baked-on powder coat finish. The Pivot Axle shall be fabricated from 11 gauge steel tube and will have a multi-stage baked-on powder coat finish. The See Saw Body Components shall be made from high density 3/4" and 1" sheet plastic specially formulated for optimum UV stability and color retention. The Playground Event Spring shall be 5-3/4" O.D. with a free height of 14" and will have a multi-stage baked-on powder coat finish. The Event Spring Retainer shall be fabricated using precision cut and formed 1/8" thick sheet steel and will have a multi-stage baked-on powder coat finish. The See Saw Bracket shall be fabricated from 10 gauge steel and will have a multi-stage baked-on powder coat finish. The Post Cap R5 Dome shall be precision die-cast from a high-strength aluminum alloy. The Pipe End Cap shall be fabricated from 1-3/8" OD black acetel copolymer rod. 21264 MNT - Angled Landing Pad to Mount RV The Angled Landing Pad to Mount Frame RV shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.315" O.D. 12 gauge handles, stainless steel housing and 1/4" thick steel brackets and will be Powder Coated as specified. The Landing Pad shall be fabricated using punched, formed and welded 12 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. 1830 - Telescope On Wall The Telescope shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". The Telescope Mounting Bracket shall be precision laser-cut and formed from 3/16" sheet steel and will be Powder Coated as specified. The Telescope Disc Spacer Wall and Mounting Grip shall be made from high density 3/4" sheet plastic specially formulated for optimum UV-stability and color retention. The Telescope Lens Small and Large shall be fabricated using .118" thick Polycarbonate. The Telescope Swivel Bracket shall be 3-pieces precision laser-cut and welded together from 3/16" thick H.R. sheet steel and will be Powder Coated as specified. 1812 - Driver Wheel to Post The Driver Wheel Casting shall be precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. The Wheel Hub shall be machined from 3-3/4" Dia. high strength aluminum alloy and will be Powder Coated as specified. The Steering Wheel to Post Bracket shall be precision laser cut from 1/4" thick rolled sheet steel with welded 1.660" 11 gauge steel tubing and 1" Dia. machined stainless steel spindle and will be Powder Coated as specified. The Split Collar Half shall be precision laser cut from 1/4" thick rolled sheet steel and will be Powder Coated as specified. 1710 - Twister Slide The Twister Slide shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". The Single Slide Leg shall be fabricated of 1.660" O.D. 11 gauge tube steel welded onto a 10 gauge steel plate and will be Powder Coated as specified. The Twister Slide Support shall be fabricated of 1.660" O.D. 11 gauge tube steel welded onto a 3/16" steel plate and will be Powder Coated as specified. 1702 - Double Slide The Double Slide Spacer shall be fabricated using punched and formed 12 gauge sheet Steel and shall be Play-Tuff(TM) coated after fabrication. The Double Slide shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". The Double Slide Leg shall be fabricated of 1.660" O.D. 11 gauge tube steel welded onto a 3/16" plate steel with a 5/8" steel rod welded to the base as a footing anchor and will be Powder Coated as specified. The Slide Support shall be fabricated of 1.660" O.D. 11 gauge steel tubing welded onto a 3/16" steel plate with a 5/8" steel rod welded to the base as a footing anchor and will be Powder Coated as specified. 1310 - Transition Wall The Transition Wall shall be fabricated from 1.315" O.D. 12 guage steel tubing, welded 1.029" O.D. 14 guage vertical rails and handles and 1/2" thick steel tabs and will have a multi-stage baked on powder coat finish. The Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked on powder coat finish. 1219 - Deep Rung Arch Climber The Arch Climber Deep Rung shall be fabricated from 1.660" O.D. 11 gauge steel tubing outer rails welded to 1/4" thick steel plates and 1.315" O.D. 12 gauge steel tubing rungs and will be Powder Coated as specified. 1210 - Vertical Ladder The Vertical Ladder shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1.315" O.D. 12 gauge steel rungs and 1/4" thick steel mounting plate and will be Powder Coated as specified. 1209 - Transfer Station The Steps & Decks shall be fabricated from 12 gauge punched sheet steel with reinforcing cross members and gussets. Each Step and Deck shall be Play-Tuff(TM) coated after fabrication. The Step Rails shall be fabricated from 1.315" O.D. 12 gauge and 1.660" O.D. 11 gauge steel tubing and will be powder coated as specified. The Step Deck Legs shall be fabricated from 1.660" O.D. 11 gauge steel tubing welded to a 10 gauge mounting bracket. The Step Deck Leg will be Powder Coated as specified. 1206 - ADA Steps with Walls The ADA Steps shall be fabricated using 12 gauge punched steel with reinforcing cross members and gussets. All surfaces to be Play-Tuff(TM) coated. The ADA Step Walls shall be fabricated using 1.315" O.D. 12 gauge steel railing welded to 1.029" O.D. 14 gauge evenly spaced vertical rungs with welded 1/4" brackets and will be Powder Coated as specified. 1106 - Half Hex Deck 4 Post Assembly The Half Hex Deck 4 Post shall be constructed using 12 gauge sheet steel which shall be formed and fabricated into required designs and punched with a uniform hole pattern and will be Play-Tuff(TM) coated after fabrication. The Mounting Blocks shall be two part and precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. 1101 - Square Deck Assembly The Square Deck shall be constructed using 12 gauge sheet steel which shall be formed and fabricated into required designs and punched with a uniform hole pattern. The Decks will be Play-Tuff(TM) coated after fabrication. The Mounting Blocks shall be two part and precision die- cast from a high strength aluminum alloy. The Mounting Blocks will be Powder Coated as specified.