PC-2479 - Mini-Go-Round 
 	The Mini-Go-Round Spindle Cap shall be made from precision cut 1/2" thick steel and will be Powder Coated as specified. The Mini-Go-Round Deck & Seat shall be fabricated using punched, formed, and welded 14 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The Mini-Go-Round Driver Wheel shall be made from high density 1" thick sheet plastic specially formulated for optimum UV stability and color retention. The Mini-Go-Round Frame shall be fabricated using 1.029" O.D. 14 gauge steel tubing with welded 1/4" thick steel plates and will be Powder Coated as specified. The Mini-Go-Round Center Post shall be fabricated using 3.5" O.D. 11 gauge steel tubing with welded 3/8" thick and 1/4" thick steel mounting plates and will be Powder Coated as specified. The Mini-Go-Round Bracket Spacer shall be made from precision cut 1/4" thick steel and will be Powder Coated as specified. The Mini-Go-Round Bracket shall be fabricated using welded 3/16" and 3/8" thick steel plates and will be Powder Coated as specified. The Mini-Go-Round Top Rail shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1/4" thick steel mounting plates and will be Powder Coated as specified. The Merry-Go-Round Bottom Center Post shall be fabricated using 5" O.D. 7 gauge steel tubing with a machined 2.5" O.D. steel spindle and will be Powder Coated as specified. The Spinner Bearing Housing shall be machined using 5" O.D. 1/2" wall with welded 3/8" thick steel mounting plate and will be Powder Coated as specified. The Post Cap R5 Dome shall be precision die-cast from a high-strength aluminum alloy and will be Powder Coated as specified.

PC-1921 - 2-Seat Seesaw 
 	The 2-Seat Seesaw Beam Weldment Shall be fabricated using 3.5" O.D. 11 gauge steel tubing, 1.900" O.D. 11 gauge steel beam gusset and handle posts, 1.315" O.D 12 gauge steel handle bars, 3.5" square tubing torsion spring housing, 3/16" thick steel plates, and 10 gauge steel torsion spring shroud and will have a multi-stage baked-on powder coat finish. The Torsion Spring Mount Tall Spacer, Torsion Spring Mount, 2-Seat Seesaw Base & Spacer Plate shall be fabricated from 1/4" thick steel and will have a multi-stage baked-on powder coat finish. The Cap & Spacers shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Spinner Seat shall be fabricated from UV-stabilized, Roto-Molded LDPE with a 1/4" wall thickness. The Torsion Spring Cap shall be made from 3/4" thick ultra high molecular weight polyethylene specially formulated for optimum UV resistance.