1808 - Poly Gable Roof 
 	The Poly Gable Roof shall be manufactured from UV-stabilized LLDPE (linear low-density polyethylene) with an average wall thickness of 1/4". The Roof Support Casting shall be precision die-cast from a high strength aluminum alloy. The Roof Support Casting will be Powder Coated as specified.

PC 4286 - Bench w/ Back 
 	The Bench Divider shall be fabricated using 1.029" O.D. 14 gauge steel tubing with welded 1/4" thick steel mounting brackets and will be Powder Coated as specified. The Bench Top shall be fabricated using punched, formed and welded 14 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The Bench Frame In-Ground Leg shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 10 gauge steel mounting plate and will be Powder Coated as specified. The Bench Frame Surface Mount shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 1.5" x 3" rectangular tube steel and welded 10 gauge steel mounting plates and will be Powder Coated as specified.

PC 4221 - Pedestal Picnic Table 
 	The Pedestal Seat Frame Mount shall be fabricated using 1.5" x 3" x 0.120" steel tubing with welded 2.375" O.D. 11 gauge steel Mounting Rail, 12 gauge sheet steel End Cap, 1/4" thick steel Mounting Plate, and 10 gauge sheet steel Support Brackets and will be Powder Coated as specified. The Pedestal Table shall be fabricated using punched, formed and welded 14 gauge sheet steel. The Pedestal Table shall be Play-Tuff(TM) coated after fabrication. The Pedestal hardware Pin shall be machined from stainless steel round bar. The Picnic Table Pedestal shall be fabricated using 4" x 0.25" square steel tubing with welded 2.375" O.D.11 gauge steel supports,10 gauge sheet steel Support Brackets, and 12 gauge steel End Cap and will be Powder Coated as specified. The Table Seat shall be fabricated using punched, formed and welded 14 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The 3/8" x 2" S Plate shall be precision laser cut from 1/4" HR sheet steel and will be Powder Coated as specified.

PC 2181 - Single Post Swings 
 	The 8' Single Post Swing Post shall be fabricated using 5" O.D. 11 gauge galvanized steel tubing and will be Powder Coated as specified. The 10' Single Post Swing Post shall be fabricated using 5" O.D. 7 gauge galvanized steel tubing and will be Powder Coated as specified. The Single Post Swing Tree Top Post shall be fabricated using 5" O.D. 11 gauge galvanized steel tubing and will be Powder Coated as specified. The Single Post Swing Beam shall be fabricated using 3.5" O.D. 11 gauge galvanized steel tubing with welded 3/16" thick steel hangers and will be Powder Coated as specified. The Single Post Swing Casting shall be cast from a high-strength aluminum alloy and will be Powder Coated as specified. The Post Cap shall be precision die-cast from a high-strength aluminum alloy and will be Powder Coated as specified. The Swing Chain shall be 7 mm (1/4") PC Grade 30 chain with a silver shield cold galvanized finish. The Swing Seats shall be molded from a UV-stabilized flexible rubber compound with slash-proof, reinforced metal inserts.

1639 - Clubhouse Assembly 
 	The Clubhouse Panels and Trim shall be made from high density 3/4" thick hot extruded sheet plastic specially formulated for optimum UV stability and color retention. The Clubhouse Table Support shall be fabricated using 1.660" O.D. steel tubing welded to a 1/4" thick pipe plug with threaded insert and will be Powder Coated as specified. The Store Panel Counter Bracket shall be precision laser cut and formed from 3/16" sheet steel and will be Powder Coated as specified. The Mounting Lugs and Socket Clamps shall be precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified.