PC-3490 - Toddler Train Engine 
 	SLIDE SIDE GUARDS: Shall be fabricated from 1.029" O.D. 14 gauge steel tubing welded to 10 gauge mounting tabs and will have a multi-stage baked-on powder coat finish. TODDLER TRAIN DECK & STEPS: Shall be fabricated using 12 gauge punched steel with reinforcing cross members and gussets and will be Play-Tuff™ coated. TODDLER TRAIN PANELS: Shall be made from high density 3/4" thick hot extruded polyethylene sheet plastic specially formulated for optimum UV stability and color retention. TODDLER TRAIN POSTS: Shall be fabricated from 1.5" x 3" rectangular steel tubing and will have a multi-stage baked-on powder coat finish. TODDLER TRAIN ROOF: Shall be fabricated using 14 gauge punched steel and will have a multi-stage baked-on powder coat finish. HARDWARE: Shall be stainless steel, zinc/nickel plated or galvanized as required to resist rust and corrosion.

PC 1511 - Dual Sand & Water Table 
 	The Bubbles shall be formed from clear ploy-carbonate. The Sand Table Legs shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel brackets and will be Powder Coated a specified. The Sand & Water Table, Accent Panels, Basin Covers, Drain Plug Retainer & Drain Plug Grip shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Drain Plug Top & Drain Plug Bottom shall be machined from nylon 6/10. The Drain Plug Tether shall be made from clear vinyl coated Ø 1/4" steel cable, with crimped aluminum ring terminals.

1704 V2 - Poly Wave Single Slide V2 
 	The Poly Wave Slide V2 shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Slide Leg & Footing shall be fabricated using 1.660" O.D. 11 gauge steel tubing with a welded 3/16" thick steel plate and will be Powder Coated as specified.

1210 - Vertical Ladder 
 	The Vertical Ladder shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1.315" O.D. 12 gauge steel rungs and 1/4" thick steel mounting plate and will be Powder Coated as specified.