RV 21000 - Revolution Post Top Cap 
 	The Revolution Post Top Cap sall be precision die-cast from a high-strength aluminum alloy. The Revolution Post Top Cap will be Powder Coated as specified.

RV 12831 - Matrix Angled Net Wall RV 
 	The 16-Link Galvanized Chain shall be 5/0 galvanized low-carbon steel chain with silver shield finish. The Matrix Angled Net Wall shall be made from 16 mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end ferrules. The Matrix Net Wall Beam shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel mounting brackets, 3/16" thick steel anchors, and 1.315" O.D. 12 gauge steel handles and will be Powder Coated as specified. The Post Anchor Bracket RV shall be fabricated using 1/4" thick stainless steel plate with welded 3/16" thick stainless steel anchor and will be Powder Coated as specified.

RV 10000 - Revolution Post 
 	The Revolution Core Post shall be made from 3.500" O.D. 11 gauge galvanized steel tubing. The Revolution Bottom Cap shall be precision die-cast from a high-strength aluminum alloy. The Revolution Bottom Cap will be Powder Coated as specified. The Revolution Mounting Sleeve shall be precision die-cast from a high-strength aluminum alloy. The Hole Plug shall be precision molded nylon for durability, holding stength and snug installation.

R5 1301 - Wall Steel Bars 
 	The Wall Steel Bars shall be fabricated using 1.029" O.D. 14 gauge tube steel welded vertically on 4" centers between vertical 1.315" O.D. 12 gauge tube steel balusters and horizontal 1.315" O.D. 12 gauge tube steel rails, top and bottom and will be Powder Coated as specified.

1313 - Curved Post Handle 
 	The Curved Post Handle shall be 1.315" O.D. 12 gauge steel tubing and will be Powder Coated as specified.