PC 2190 - T-Swing Assembly 
 	The Bucket Seats shall be molded from UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Swing Chain shall be 7mm (1/4") PC Grade 30 chain with a silver shield cold galvanized finish. The T-Swing Structure Overhead Swing Beam shall be fabricated using 3.5" O.D. 11 gauge steel tubing. Swing Posts shall be fabricated using 3.5" O.D. 8 gauge galvanized steel tubing. All swing structure components will be Powder Coated as specified.

PC-1501-1502 - Sand Digger 
 	The Digger Seat Top & Bottom shall be made from high density 1" sheet plastic specially formulated for optimum UV stability and color retention. The Digger Chassis ADA & w/ Seat shall be made from 2.375" O.D. 10ga steel tubing, 2" schedule 80 pipe, 1" round steel bar, 3/16" thick steel plug and will have a multi-stage baked-on powder coat finish. The Digger Leg shall be made from 1.660" O.D. steel tubing, 1-1/4" round steel bar, 5/8" round steel bar, 1/4" and 3/16" sheet steel and will have a multi-stage baked-on powder coat finish. The Digger Handles shall be made from 1.029" O.D. 14ga steel tubing, 1-3/4" stainless tubing, 3/4" x 3/16" DOM Tubing, 12ga  HR sheet steel, 10ga HR sheet steel and will have a multi-stage baked-on powder coat finish. The Digger Link shall be made from 1.029" O.D. 14ga steel tubing, 1-3/8" HR steel bar, 5/8" HR sheet steel and will have a multi-stage baked-on powder coat finish. The Digger Bucket shall be fabricated using high strength aluminum. The Digger Bucket Pivot Shaft shall be fabricated using 1/2" O.D. 303 stainless steel bar.