5701 - NFuse Single Slide Frame ARCH SLIDE LANDING: Shall be fabricated using punched, formed and welded 12 guage sheet steel and shall be Play- Tuff™ coated after fabrication. SINGLE SLIDE SPACER CANADA: Shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. SINGLE SLIDE LEG. Shall be fabricated using 1.660 OD 11ga tube steel, with 10ga sheet steel and will have a multi- stage baked on powder coat finish. NFUSE SINGLE SLIDE SHORT AND TALL WALLS (LEFT & RIGHT). Shall be fabricated using 1.315 and 1.029 OD tube steel, with 3/8", 1/4" and 12ga sheet steel and will have a multi-stage baked on powder coat finish. NFUSE SINGLE SLIDE - TOP RAIL. Shall be fabricated using 1.315 OD tube steel, with 3/8" and 3/16" sheet steel and will have a multi-stage baked on powder coat finish. POLY SLIDE 48" CANADA: Shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". HARDWARE: Shall be stainless steel, zinc/nickel plated or galvanized as required to resist rust and corrosion. 5105 - NFUSE Platform Frame NFUSE FRAME: Shall be fabricated using 1-1/2" x 3" Rectangle Tube, 1.315" OD and 1.029" OD tube steel, 12ga sheet steel, and 1/4" thick steel Clevises and will have a multi-stage baked-on powder coat finish. MOUNTING BLOCKS: Shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. HARDWARE: Shall be stainless steel, zinc/nickel plated or galvanized as required to resist rust and corrosion. 5303 - NFuse Snake Net Extension The NFuse Snake Net Extension - Frame Rail Ground Mount and Surface Mount shall be fabricated using 1-1/2" x 3" rectangle tube, Ø1.315" OD tube steel, 1/4" HR sheet steel and AISI 304 Anchor Clevises and will have a multi-stage baked-on powder coat finish. The NFuse Hex Net Extension - Net shall be made from 16mm steel-reinforced rope with high-strength copolymer plastic intersection connectors and machined aluminum end ferrules. The Socket Clamp Rope Clevis shall be precision cut and formed from 3/16" stainless steel. The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Mounting Blocks & Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. R5-1925 - Hex Net Hub R5 The Hex Net Hub Rubber shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Hex Net Hub Rubber Plug Top and Bottom shall be machined from high strength aluminum alloy. The Hex Net Hub Nets shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum end Ferrules. The Hex Net Hub Top Rail shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 3/16" thick steel anchors and 1/4" thick steel mounting brackets and will have a multi-stage baked-on powder coat finish. The Hex Net Rubber Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Socket Clamps and Mounting Blocks shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Socket Clamp Clevis shall be fabricated using 3/16" thick stainless steel. NF 5801 6 - NFuse Shade Canopy The NFuse Shade Bottom Brace shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel caps and 1/2" thick steel tabs and will have a multi-stage baked-on powder coat finish. The NFuse Shade Side & Top Brace shall be fabricated using 2.375" O.D. 11 gauge steel tubing with welded 3/16" thick steel caps and 1/2" thick steel tabs and will have a multi-stage baked-on powder coat finish. The NFuse Shade Post shall be fabricated using 5.000" O.D. 11 gauge steel tubing and will have a multi-stage baked-on powder coat finish. The NFuse Curved Swagged R35 Shade Post shall be fabricated using 3.500" O.D. 11 gauge steel tubing and will have a multi-stage baked-on powder coat finish. The HDPE Canopy Post Cap R35 shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Sail Canopy Tensioner shall be fabricated using 2.000" O.D. 11 gauge stainless steel tubing, 1/4" thick stainless steel plate, 3/16" thick steel plugs, and hardware. The NFuse Curved R35 Shade Post shall be fabricated using 3.500" O.D. 11 gauge steel tubing with welded 1/4" thick steel cap, plate, and tabs and will have a multi-stage baked-on powder coat finish. The NFuse Curved R5 Shade Post shall be fabricated using 5.000" O.D. 11 gauge steel tubing with welded 1/4" thick steel tabs and will have a multi-stage baked-on powder coat finish. The Post Cap R5 Dome shall be precision die-cast from a high-strength aluminum alloy and will have a multi-stage baked-on powder coat finish. THe NFuse Shade Sail Canopy shall be UV & mildew resistant woven acrylic fabric, folded and stitched for strength and to accommodate steel cable. The NFuse Shade Cables shall be 1/4" steel cable with a clear vinyl coating. NF-5206 - NFuse Explorer's Arch Bay The Socket Clamp Rope Clevis shall be precision cut and formed using 3/16" stainless steel. The NFuse Hex Net Bay - Bracket & Angled Net Link Deck Connector shall be fabricated using 1/4" sheet steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Hex Net Bay - Top Inside Weldment shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel plates and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Explorer's Arch Bay - Top Rail & NFuse Molecule Bay - Bottom Rail shall be fabricated using 2.375" O.D. steel tubing with welded 1/4" thick steel clevises and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Explorer's Arch Bay - Side Rail shall be fabricated using 1.900" O.D. steel tubing with welded 1/4" thick steel clevises and 3/16" thick stainless steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Explorer's Arch Bay - Extension Frame shall be fabricated using 1-1/2" x 3" x .120" Rectangular TS, welded 1/4" thick steel plates and clevises, 3/16" thick stainless steel clevises and 5/8" HR round bar and will have a multi-stage baked-on powder coat finish. The NFuse Explorer's Arch Bay - Ladder shall be fabricated using 2.375" O.D., 1.900" O.D. and 1.315" O.D. steel tubing with welded 1/4" thick steel plates and 5/8" HR round bar and will have a multi-stage baked-on powder coat finish. The Round Roto Panel shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The NFuse Explorer's Arch Bay - Trim shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The NFuse Explorer's Arch Bay - Back Rest shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The NFuse Explorer's Arch Bay - Nets shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum ferrules. The Roto Panel Net Bracket shall be fabricated using 3/16" thick steel bracket with welded 3/16" thick steel clevis and will have a multi-stage baked-on powder coat finish. The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Mounting Blocks & Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. 5205 - NFuse Ring Traverse The NFuse Ring Traverse Weldment shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" plates and 3/16" thick steel hangers and will have a multi-stage baked-on powder coat finish. The NFuse Ring Traverse - Top Inside Weldment shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" plates and 3/16" thick steel clevises (for deck mount version) and will have a multi-stage baked-on powder coat finish. The NFuse Ring Traverse - Rubber Pad shall be constructed of UV-stabilized flexible rubber compound with slash proof, reinforced metal inserts. The Angled Net Link Deck Connector shall be fabricated using 1/4" thick steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Deck Link Net shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum ferrules. 5203 - NFuse Tri-Ring Bay The Socket Clamp Rope Clevis shall be precision cut and formed using 3/16" stainless steel. The NFuse Hex Net Bay - Bracket, Chain Surface Mount Weldment, & Angled Net Link Deck Connector shall be fabricated using 1/4" sheet steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Tri-Ring Bay - Inner & Outer Rail shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel plates and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The Chain shall be 5/0 galvanized chain. The Nets shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum ferrules. The NFuse Tri-Ring Bay - S-Plate shall be precision cut from 10 gauge stainless steel. The Tri-Ring shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Mounting Blocks & Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. 5202 - NFuse Balance Step Bay The Socket Clamp Rope Clevis shall be precision cut and formed using 3/16" stainless steel. The NFuse Hex Net Bay - Bracket & Angled Net Ling Deck Connector shall be fabricated using 1/4" sheet steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Balance Step Bay - Inner & Outer Rail shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel plates and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Balance Step Bay - Bottom Rail shall be fabricated using 1.660" O.D. steel tubing with welded 1/4" thick steel plates and plugs and 3/16" thick stainless steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Balance Step Bay - Nets shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum ferrules. The NFuse Balance Step Bay - Step Pads shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The NFuse Balance Step Bay - Spacer shall be made from high density 1" sheet plastic specially formulated for optimum UV stability and color retention. The In-Ground Leg shall be fabricated using 1.660" O.D. steel tubing and will have a multi-stage baked-on powder coat finish. The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Mounting Blocks & Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. 5201 - NFuse Hex Net Bay The Socket Clamp Rope Clevis shall be precision cut and formed using 3/16" stainless steel. The NFuse Hex Net Bay - Bottom Weldment shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel plates and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Hex Net Bay - Bracket shall be fabricated using 1/4" sheet steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The NFuse Hex Net Bay - Top Inside & Top Outside Weldment shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/4" thick steel plates and 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. The Mounting Inserts shall be precision die-cast from a high-strength aluminum alloy. The Mounting Blocks & Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. The NFuse Hex Net Bay - Nets shall be made from 16mm steel-reinforced rope with high-strength co-polymer plastic intersection connectors and machined aluminum ferrules. The Angled Net Link Deck Connector shall be fabricated using 1/4" thick steel with welded 3/16" thick steel clevises and will have a multi-stage baked-on powder coat finish. 5103 - NFuse Geo-Hex Wall Frame The NFuse Geo Hex Wall Frame shall be fabricated using 1-1/2" x 3" Rectangle Tube and 1/4" thick steel clevises and tabs and will have a multi-stage baked-on powder coat finish. The NFuse Geo-Hex Wall Frame HDPE shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Mounting Blocks & Lugs shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. The Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. 5102 - NFuse 2-Rung Access Ladder Frame The NFuse 2-Rung Access Ladder Frame shall be fabricated using 1-1/2" x 3" Rectangle Tube, 1.315" O.D. 12 gauge steel tubing and 1/4" thick steel Clevises and will have a multi-stage baked-on powder coat finish. The Mounting Blocks shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. 1963 - Seat on Post The Steel Lily Pad shall be fabricated using 12 gauge punched and formed sheet steel and shall be Play-Tuffâ„¢ coated after fabrication. The Seat on Post R5/R3.5 shall be fabricated using 1.315 O.D. 12 gauge steel tubing and shall have a powder coat finish. The Seat on Post RV shall be fabricated using 1.315" O.D. 12 gauge steel tubing with welded 1/4" thick stainless steel mounting brackets and shall have a powder coat finish. 1961 R - Rock Step The Rock Step shall be constructed of UV-stabilized, rotationally molded, linear, low density polyethylene with an average wall thickness of .250". The Rock Step Leg shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel mounting plate and will be Powder Coated as specified.