PC 4221 - Pedestal Picnic Table 
 	The Pedestal Seat Frame Mount shall be fabricated using 1.5" x 3" x 0.120" steel tubing with welded 2.375" O.D. 11 gauge steel Mounting Rail, 12 gauge sheet steel End Cap, 1/4" thick steel Mounting Plate, and 10 gauge sheet steel Support Brackets and will be Powder Coated as specified. The Pedestal Table shall be fabricated using punched, formed and welded 14 gauge sheet steel. The Pedestal Table shall be Play-Tuff(TM) coated after fabrication. The Pedestal hardware Pin shall be machined from stainless steel round bar. The Picnic Table Pedestal shall be fabricated using 4" x 0.25" square steel tubing with welded 2.375" O.D.11 gauge steel supports,10 gauge sheet steel Support Brackets, and 12 gauge steel End Cap and will be Powder Coated as specified. The Table Seat shall be fabricated using punched, formed and welded 14 gauge sheet steel and shall be Play-Tuff(TM) coated after fabrication. The 3/8" x 2" S Plate shall be precision laser cut from 1/4" HR sheet steel and will be Powder Coated as specified.

PC 2120 - Arch Swing Assembly R5 
 	The Swing Arch & Swing Beam shall be fabricated using 5" O.D. 11 gauge galvanized steel tubing and will be Powder Coated as specified. The Arch Swing Casting and Arch Swing Washer shall be cast from a high-strength aluminum alloy and will be Powder Coated as specified. The Swing Chain shall be 7 mm (1/4") PC Grade 30 chain with a silver shield cold galvanized finish. The Swing Seats shall be molded from a UV-stabilized flexible rubber compound with slash-proof, reinforced metal inserts.