PC-2497 - Celebration Spinner CELEBRATION SPINNER BENCH TOP & BENCH ACCENT: Shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. CELEBRATION SPINNER BENCH RAIL : Shall be fabricated using 1.660" OD 11ga. tube steel,1.315" OD 12ga. tube steel with 1/4" sheet steel and will have a multi-stage baked on powder coat finish. CELEBRATION SPINNER RAIL: Shall be fabricated using 1.660" OD 11ga. tube steel,1.315" OD 12ga. tube steel with 1/4" sheet steel and will have a multi-stage baked on powder coat finish. CELEBRATION SPINNER HANDLE: Shall be fabricated using 1.315" OD 12ga. tube steel with 1/4" sheet steel and will have a multi- stage baked on powder coat finish. CELEBRATION SPINNER UPRIGHT BEAM: Shall be fabricated using 1.5"X3"X.120 rect. tube steel with 1/4" and 12ga. sheet steel and will have a multi-stage baked on powder coat finish. HARDWARE: Shall be stainless steel, zinc/nickel plated or galvanized as required to resist rust and corrosion. 16521 - Solo Instrument Panel The Split Collar Half shall be precision cut and formed from 1/4" thick steel and will have a multi-stage baked-on powder coat finish. The Solo Mount shall be fabricated using 1.900" O.D. 11 gauge steel tubing with welded 10 gauge and 1/4" thick steel brackets and will have a multi-stage baked-on powder coat finish. The Solo Instrument Panel shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Solo shall be an assembly consisting of a plastic framework, aluminum or fiberglass chimes, and molded mallets. Contact Freenotes Harmony Park for complete technical specifications. 16520 - Composer Instrument Panel The Sit Down Bracket Double R3.5 shall be precision cut and formed from 1/4" thick sheet steel and will have a multi-stage baked-on powder coat finish. The Composer shall be an assembly consisting of a plastic framework, metal tubing, and molded mallets. Contact Freenotes Harmony Park for complete technical specifications. The Mounting Blocks shall be two-part and precision die-cast from a high strength aluminum alloy and will have a multi-stage baked-on powder coat finish. R35-1600 - R3.5 Panel Assembly The R3.5 Panel shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The R3.5 Panel Bracket shall be precision cut from 3/16" HR sheet steel and will be Powder Coated as specified. The Mounting Lugs shall be precision die-cast from a high-strength aluminum alloy and will be Powder Coated as specified. The Socket Clamps shall be two-part and precision die-cast from a high strength aluminum alloy and will be Powder Coated as specified. PC 1580 1580 SM - Paint Station In-ground & Surface Mount The Paint Station Frame shall be made of 2.375" O.D. 11 gauge tube steel with a welded support bar made of 1" x 2" rectangular steel tubing and welded on 3/8" tabs for mounting. The Paint Station Frame will be Powder Coated as specified. The Paint Station Panel Set shall be made from high density 3/4" sheet plastic specially formulated for optimum UV-Stability and color retention. The Paint Station Window shall be fabricated using .118" thick Polycarbonate. PC 1510 - Triple Sand and Water Table The Triple Sand & Water Basin shall be formed from clear poly-carbonate. The Triple Sand & Water Table Legs shall be fabricated using 1.660" O.D. 11 gauge steel tubing with welded 1/4" thick steel brackets and will be Powder Coated as specified. The Triple Sand & Water Tables, Lids, Turner Collars, Turners, Drain Plug retainer & Drain Plug Grip shall be made from high density 3/4" sheet plastic specially formulated for optimum UV stability and color retention. The Drain Plug Top & Drain Plug Bottom shall be machined from nylon 6/10. The Drain Plug Tether shall be made from clear vinyl coated 1/4" Dia. steel cable, with crimped aluminum ring terminals. 18021 - Shade Canopy Square Roof The Roof Canopy Jack Screw shall be fabricated using 2" O.D. 10 gauge steel tube with welded 3/16" thick steel plugs, welded 1" O.D. machined steel retainer stub, 1" O.D. 11 guage steel cable spacer and punched 10 gauge steel retainers and will be Powder Coated as specified. The Roof Canopy Square Rafter Hub shall be fabricated using 2.50" O.D. schedule 40 pipe with welded zinc nut and stainless steel stop and will be Powder Coated as specified. The Roof Canopy Square Rafter shall be fabricated using 2.375" O.D. 10 gauge steel tubing with welded 1/2" thick steel plug and will be Powder Coated as specified. The Roof Canopy Support Leg shall be fabricated using 2.375" O.D. 10 gauge steel tubing welded to a formed 3/16" thick steel cradle and will be Powder Coated as specified. The Shade Canopy Square shall be UV & mildew resistant woven acrylic fabric, folded and stitched for strength and to accommodate steel cable. The 1/4" Canopy Wire Cable shall be Ø1/4" steel cable with a clear vinyl coating.